These oils come with varying viscosities, rated by numbers such as 10W-40. What does this number mean?
This oil has been designed for temperatures between 0 and 40 degrees Celsius. The number before W or BW refers to the cold weather, and the number after W or BW refers to the hot weather.
Oil viscosity is very important when buying one for your vehicle. The oil’s viscosity determines how well it will perform under different weather conditions and its ability to lubricate your machine.
When buying the best oil for ATV with a wet clutch, you should opt for a fully synthetic one, as it will work the best. If your oil is not fully synthetic, your engine will wear out much faster, and you will have to change the oil very soon.
Going for a brand you are familiar with and have used always a good idea. You should also opt for one based on its quality, as this is very important for the health of your engine.
You must also consider how much you will spend on oil before buying one.
This will ensure you buy the best oil for ATV with a wet clutch, providing better performance and protecting your engine.
Why is it important to choose the right motor oil for ATV?
Many people are unaware of the importance of using the right motor oil for an ATV with a wet clutch. If you don’t use good quality motor oil, then it can cause damage to your machine and also affect its performance.
Here are some problems that can occur:
Using the wrong kind of motor oil in your ATV can damage it
Oil is a very important part of your ATV. Without it, the moving parts of your vehicle will grind together, which can cause irreparable damage to them in a very short time.
Using cheap, low-quality motor oil can cause your ATV to perform poorly
If you use a certain kind of oil in your vehicle, it helps provide lubrication to your machine’s moving parts. This will ensure that they move smoothly and without any issues.
Using poor-quality motor oil can cause your engine to seize up
If you use poor-quality oil in your ATV, then it will not be able to provide the required lubrication. This can result in the engine seizing up, which can happen quickly too!
Using low-quality motor oil can cause serious injuries
High-quality ATV oil should have the ability to prevent your vehicle from overheating. This will help improve your machine’s performance and prevent the engine from seizing up and causing serious injuries.
What is an ATV wet clutch?
A wet clutch is a motorcycle or dirt bike clutch that uses oil to lubricate the actuating parts. Using oil for this purpose allows the clutch plates to run very close, which reduces the amount of clutch lever pulls needed to disengage them. The term “wet” refers to the lubrication that helps to reduce the force required to disengage the clutch plates. ATV wet clutches are designed to provide a smoother shift between gears.
What is the benefit of a wet clutch?
The benefit of a wet clutch is that it allows for smoother gear-shifting. It also reduces the pull force needed to disengage the clutch plates. The clutch engagement point and the release point of the clutch remain close together, which reduces wear on the clutch and also makes gear-shifting smoother. It also generates less heat and noise due to the oil used for lubrication.
How long does a wet clutch last?
It is difficult to say how long a wet clutch will last as it varies depending on the quality of the bike and its usage. A high-quality wet clutch should last a long time and provide smoother gear-shifting. However, the clutch may wear out faster if riding aggressively due to the increased heat and friction. Generally, a wet clutch should last about 20,000 – 40,000 km, and you may have to change it.
How can I make my wet clutch last longer?
You can prolong the life of your wet clutch by riding at a moderate speed and accelerating slowly. Avoid using the clutch more than necessary, increasing its wear if possible. You should also use high-quality oil to provide better lubrication and keep the clutch cooler.