The Cobra 29 LTD Classic is a legendary CB radio known for its robust features and reliable performance. Equipped with SWR Calibration, an Antenna Warning Indicator, and Adjustable Dynamike Boost, it ensures clear communication and optimal functionality.
Key Features of Cobra 29 NW Classic CB Radio
- Product Dimensions: 9.25 x 7.25 x 2.25 inches
- Item Weight: 5.6 pounds
- Color: Black
- Material: Plastic
- Power Source: Corded Electric
- Radio Band: CB
- SWR Calibration,
- Antenna Warning Indicator,
- Instant Channel 9,
- Adjustable Dynamike Boost,
- Switchable Noise Blanker,
- RF Gain.
Its additional features, like PA Capability and Dimmer Control, make it a versatile choice for professionals seeking a high-quality, corded electric radio system.
- SWR Calibration allows for antenna calibration to ensure maximum performance.
- The Antenna Warning Indicator informs if the antenna needs to be checked.
- Instant access to emergency channel 9.
- Adjustable Dynamike Boost for increased voice clarity.
- PA Capability allows for use as a Public Address system.
- Dimmer Control for adjustable brightness of the front panel.
- Switchable Noise Blanker for increased noise reduction.
- RF Gain control for managing reception sensitivity.
- Some users reported issues with the longevity of the product.
- Some users reported issues with the tuning.
- The product may require professional installation.
- The product is corded, limiting its portability.
- Some users reported issues with the signal strength.
Cobra 29 NW Classic: Rundown
Cobra’s latest 29 radio has all but one of the features of the original Cobra 29 LTD. The missing control is the Delta Tune knob. This was a functional feature back in the 23-channel crystal-controlled radio days.
The older radios didn’t meet the tighter frequency tolerances required of today’s CB radios. They also drifted more over time as they aged. The Delta Tune allowed receiver tuning of off-frequency transmissions.
The PLL radios of today don’t drift like the older units, therefore, the Delta Tune is useless, except for it’s replacement with an echo board dual gang control.
The Cobra 29 NW Classic does, however, have some features that the old Classic didn’t have. First is the front-mounted mic connector, the channel 9 & 19 switch, and the Night Watch Electro-Luminescent illumination system with dimmer.
By the way, if the dimmer control is removed from the front panel, turned up all the way, mounted, and insulated in a secure location inside the radio chassis, its former location can be used for the Connex or Turbo echo control.
Cobra 29 NW Classic: Specification
|Citizen band transceiver
|Channels / tuning steps:
|Clarifier or Delta tune:
|13.2 VDC (3-pin connector)
|Current drain / power consumption:
|RX: 0.3-1.2 A (Squelched)
TX: Max 1.5 A
|Antenna impedance / connector:
|50 ohm / SO-239
|185*56*219 mm (7.28*2.2*8.62″)
|1.81 Kg (4 lb)
|PA. ANL/NB. Tone hi-cut. Channel 9/19 switch. Dimmer.
|Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
|Less than 1 uV (10 dB S+N/N)
|7 KHz (-6 dB)
10 KHz (-60 dB)
|AF output power / speaker:
|3 W at 7% distortion / 8 ohm
|External speaker connector:
|3.5 mm, 8 ohm
|RF output power:
|FM deviation (Factory set):
|Better than -? dB
|Microphone impedance / connector:
|? ohm / 4-pin (Metal locking ring connector)
|Microphone input level:
|Double sided with trough-hole and SMD components
|User manual (2.2 MB)
|Sams Photofact #:
Hands-on Experience with Cobra 29 NW Classic
The Cobra 29 has been the top of the line Cobra AM CB mobile for many years. This radio delivers more modulation swing than the Cobra 148 GTL. Many operator thought they were able to get more power from the 148 because it cost more money and had sideband.
On the contrary, because the 148 has sideband, a compromise was made. The audio transformer that delivers the higher voltage to the final and driver stage of the 29 isn’t used in the 148. I’ve seen 20 to 23 Watts peak out of a Cobra 29, were the 148 is capable of 16 to 18 Watts peak.
There have been rare cases of a couple Watts more out of these radios, but this is in 1 out of 200 radios. The Cobra 29 is capable of delivering 28 to 30 Watts of peak and 8 Watts of carrier power by changing the final transistor to a 2SC1969 and adding some capacitance and tuning. One area that the 148 GTL excels over the 29 is in the receiver.
The selectivity and noise reduction is better in the 148. But they are both very good receivers.
There are tricks to lower the carrier of the Cobra 29 transmitter while keeping the modulation swing almost to maximum. Say you have a amplifier that requires 25 Watts peak input to deliver full peak output power, but you only want a 2 Watt dead carrier.
First the final output transistor must be changed to the 2SC1969. Then the JP-36 jumper is removed. Add a 50 to 200 Ohm resistor and a 220 MFD 16 volt capacitor in the JP-36 location. See the schematic below for the resistor and capacitor location.
Schematic For PC Board Photo
The resistance value will have to be selected for the desired carrier level. The lower the resistance, the higher the carrier. For a cleaner signal, don’t eliminate the AMC, just adjust it for maximum modulation.
Also retune L14 for maximum RF swing then check your carrier level again. It may be necessary to select another resistor value once L14 is readjusted, or a compromise may be achieved to get the proper carrier to swing level desired.
Variable Resistor Trim Potentiometers & AMC Diode
Receiver IF Gain”S” Meter Squelch Range AMC Automatic Modulation ControlRF MeterSWR Warning Indicator Cut To Eliminate AMC
Cutting the AMC diode will create over-modulation and distortion
The cosmetics have changed. The front panel is no longer a brushed aluminum panel. It is a simulated brushed aluminum panel with electro-luminescent technology that illuminates the lettering for night vision.
It works quite well without being too bright. It gives off a glow similar to an automobile illuminated dashboard.
The front-mounted mic connector is becoming more of a necessity these days with less room in vehicles, including the big rigs. There isn’t room for side mount mic connectors in more and more vehicles as the new models come out every year.
Cobra has dropped the Sound Tracker in the Night Watch versions, but it’s still available in the non-illuminated versions. There is a mixed reaction to the Sound Tracker system.
Many operators don’t care for the unnatural sound and slight distortion when the ST is engaged. Many don’t understand that for the maximum effect, the RF gain control must be set for optimum performance.
And others just can’t be bothered to set and reset the RF gain control while they’re driving.
Manufacturers need to incorporate an inexpensive but effective digital signal processing (DSP) system in their radio. To date, this is the best way to eliminate the most noise from signals before the hit the speaker.
And this will be the only acceptable type of noise reduction by the buying public. Gimmicks won’t work.
The Cobra 29 NW Classic In Daylight Environment
The Cobra 29 NW Classic In Night Environment
If AM is your mode of operation and Cobra is your favorite brand, the 29NW Classic may be the radio you’ve been waiting for. Frequent expansion kits are available to increase the frequency coverage to 120 channels.
This would give the radio 40 channels above 40 and 40 channels below 1. These kits run from $14.95 to $24.95.
Remember that modifying these radios may be illegal in your country. Please check your regulations before attempting to make any modifications to your equipment.
What is the SWR Calibration feature in CB Radio?
SWR stands for Standing Wave Ratio, and it is a crucial aspect of CB (Citizens Band) radios and other radio communication systems. The SWR Calibration feature in CB radios allows users to adjust and optimize the performance of their radio antenna for efficient signal transmission and reception.
How does the Cobra 29 NW Classic CB Radio compare to the original Cobra 29 LTD?
The Cobra 29 NW Classic has all but one of the features of the original Cobra 29 LTD. The missing control is the Delta Tune knob. u003cbru003eu003cbru003eHowever, the Cobra 29 NW Classic has some features that the old Classic didn’t have, such as the front-mounted mic connector, the channel 9 u0026amp; 19 switch, and the Night Watch Electro-Luminescent illumination system with dimmer.
What is the Night Watch Electro-Luminescent Illumination System in CB Radios?
Electro-luminescence is the emission of light from a material or device when an electric current passes through it.u003cbru003eu003cbru003eu003cstrongu003eIn the context of CB radios, it’s conceivable that some manufacturers might have introduced new illumination systems that use electro-luminescent technology for backlighting the radio’s display or buttons for better visibility in low-light or nighttime conditions.u003c/strongu003e
What is the purpose of the Adjustable Dynamike Boost in the Cobra 29 NW Classic CB Radio?
The Adjustable Dynamike Boost allows you to adjust the microphone for loud and clear communication, enhancing the clarity of your transmissions.
Does the Cobra 29 NW Classic CB Radio have a Public Address (PA) capability?
Yes, the Cobra 29 NW Classic CB Radio does have a Public Address (PA) capability.
Does the Cobra 29 NW Classic CB Radio have a dimmer control?
Yes, the Cobra 29 NW Classic CB Radio has a dimmer control that adjusts the brightness of the NightWatch illumination.
What is the maximum power allowed by law for the Cobra 29 NW Classic CB Radio?
The Cobra 29 NW Classic CB Radio operates at a maximum power of 4 Watts, which is the maximum power allowed by law for an extended range of communication.
The Cobra 29 NW Classic CB Radio is a robust, user-friendly device renowned for its NightWatch Illumination and dual-mode AM/FM functionality. Its advanced features, such as SWR Calibration and Antenna Warning Indicator, ensure optimal performance. This makes it a preferred choice for both professional and recreational users seeking reliable and clear communication.