Best Plastic Polish For ATVs

Best Plastic Polish For ATVs
Best Plastic Polish For ATVs

The all-terrain vehicles are the most popular and compact off-road vehicles worldwide. The ATVs are manufactured and designed with such qualities and features that they are made to rule through off-road terrains and difficult trails.

ATVs ride through some messed up grounds where any other on-road vehicle would easily break down.

All over the United States, there are various types of trails in huge numbers. The muddy trails or sandstone dirt can get the ATV quite dirty and even take a toll on the ATV’s plastic parts.

Anyone who owns an ATV loves their vehicle and tries to keep it as good as new as possible by taking extra care of it after every ride.

When riding through thin openings in the woods or rocky terrain, the ATV plastic can get easily scratched or have really ugly marks.

These scratches or slight cracks do not easily get removed when you wash the ATV and need some special component to take care of the plastic parts of the ATV.

Car Guys Plastic Restorer

Car Guys Plastic Restorer

This is the most popular and unanimously praised ATV plastic polish internationally. This plastic restorer from the Car Guys brand is a premium quality product that fully restores your ATV plastic to last a very long time.

Unlike some complicated plastic polishes in the market, this plastic restorer is very easy to use and works on not only plastic but also Rubber and Vinyl.

The plastic restorer from Car Guys is known to last for several months, no matter which part of the ATV plastic you apply.

Most average products in the local stores last only a few days, then the scratches begin to show up, and the ATV plastic shine also begins to dull, but that won’t happen if you use the plastic restorer from Car Guys.

The other quality feature of the plastic restorer from Car Guys is that the solution is completely waterproof.

Many plastic polishes in the market cannot stand the effect of rain or water on them and wash off, revealing the same old scratches and old-looking plastic body of your ATV.

The solution of Car Guys is resistant to water and doesn’t get messed up even if you put your ATV through harsh rainfall.

Many ATV owners have used this solution from Car Guys as a protective coating rather than a plastic repairing product.

The plastic restorer from Car Guys has UV inhibitors that protect the ATV plastic against the effect of ultraviolet rays. This keeps the plastic as good as new and delays the ATV plastic drying and fading to a huge extent.

This means the life span of your ATV plastic is progressed and extended by this plastic restorer from Car Guys if you use it even before the plastic gets sharp scratches or starts to show marks of fading.

This plastic restorer from Car Guys can be used on multiple parts of your all-terrain vehicle, which are mentioned below:

  • Fenders
  • Tires
  • Trim
  • Dashboard
  • Bumpers
  • Engine bay components

Besides this, any plastic surfaces in your ATV or UTV can be rejuvenated using this amazing plastic restorer from Car Guys.

Many products in the market that claim to be plastic polish leave an oily mess in the plastic and don’t seem to fully dry or serve the basic purpose of repairing.

But this Plastic restorer fully dries up and has a great finishing touch.

You can touch the plastic surface later to find it all dried up, and your fingers won’t get greased.

This has also happened with many riders. Their clothes and extra hand towels have got ruined after using a cheap, unfulfilling plastic restorer.

The product from Car Guys has been made with the latest chemical science and advanced nanotechnology, which has led to the ideal plastic polish that an ATV owner can use and buy with satisfaction.

The Car Guys plastic restorer is fully made in the USA and has been popular in every country where ATVs are common.

This solution from Car Guys works fine for not only black color but all kinds of other color plastics as well and leaves an attractive shine on the surface, which makes your ATV look new. This plastic restorer from Car Guys is very easy to use.

First, you need to wipe the plastic surface with a clean cloth, use any normal cleaner sitting in your house or garage, and apply it on the surface, followed by a gentle wipe to remove any old stains or dirt clamps.

Along with the Car Guys plastic restorer, you will find a foam applicator pad that is of the best quality and helps you apply the Car Guys solution much easier.

So use the easy-to-use solution container to pour out a small quantity on this applicator pad and gently wipe the scratches present in your ATV with a circular movement of your hands.

Use the same process on the ATV plastic parts, which fade to some extent after fifteen minutes of application. Use the same applicator foam pad to wipe off the edges if some excess solution depositions are present.

The Car Guys company recommends cleaning with soap and water on the following days after you have applied the plastic restorer on all the plastic body parts of your ATV.

This plastic restorer can also be used on all automobiles’ interior and exterior surfaces, including UTVs and motorcycles.

This plastic restorer is so versatile that it can also be used for Vinyl boat seats. This ATV plastic restorer can also be used inside the house for various home restoration projects.

Pros

  • Effective cleaning and restoring ability for various surfaces.
  • Provides long-lasting UV protection.
  • Safe to use and environmentally friendly.
  • Versatile and can be used on various surfaces.
  • Made in the USA to high-quality standards.

Cons

  • The product does not work on glass and delicate instrument panel screens.
  • The UV protection might not be as long-lasting in extreme weather conditions.
  • The natural scent might not be appealing to all users.

Slick Products: Multi-Surface Shine and Protectant Spray

This plastic restorer from Slick Products is a high-quality product available in a spray-type form for easy use by the ATV owner.

If you want a superior type of ATV plastic polish available in spray form, this multi-surface shine and protectant spray should be your ideal choice.

This product works excellently on all types of plastic surfaces and can easily remove plastic ATV scratches and cuts.

This spray from the brand of the slick product is not only excellent for your vehicle’s exterior. Still, it is effective in repairing and returning the shine of interior plastic parts, too.

Once you use this spray from the slick products brand, the protective coating offers resistance against all the natural trail forces like dirt, mud, sand, and easy twig scratches on the ATV plastic.

The protective coating reduces adhesion and doesn’t let dirt and mud build-up easily on the ATV surface.

If your ATV plastic has started showing signs of old age and has lost the intensity of the original color, this spray can also help retain that.

This protectant spray performs the task of efficiently shining the plastic surfaces and retaining the plastic parameters.

This multi-surface shine and protectant spray is highly versatile and can be confidently used on all types of vinyl and rubber surfaces.

When you buy this spray from slick products, you get your hands on all one spray that solves all the shine and protection problems in your all-terrain vehicle.

The versatility further extends when you can utilize this spray’s extra feature for applying to off-road vehicles like ATVs and cars, trucks, and motorcycles.

This multi-surface shine and protectant spray is the easiest to use among all ATV plastic polishes in the international market and would benefit you well if you always run short of time.

In other products of plastic polishes, you would need to get a clean cloth, foam or microfiber applicator, and even extra cleaner products.

But the spray of this slick product can be used very easily with a quick spray and slight pressure from a finger.

Sometimes plastic polishes spill or get wasted when the user becomes a little less careful while pouring it into the absorber, but that is not a possibility with the spray of this slick product.

Some extra labor of rubbing the absorber around the ATV plastic also gets greatly reduced when spraying slick products is used.

Once you apply this spray from slick products to the plastic surfaces of your ATV, it will last a long time, and you would need to think of reapplication only after a couple of months.

Pros

Cons

Meguiar’s Ultimate Black Plastic Restorer

This can be claimed to be the best black ATV plastic restorer in the international ATV accessories industry.

The ultimate black, which gets absorbed into your ATV plastic, is much better than any other local protectant or trim products that you will find.

The shine and darkness this Meguiar’s plastic restorer imparts on the plastic parts of your ATV make the parts look very similar to a brand of ATV.

This ultimate black plastic restorer works spectacularly to remove scratches from ATV plastic surfaces.

The formula in the compact pack of Meguiar’s plastic restorer has a thick texture, allowing the user to have full control of the material. Not much goes to waste, along with this ultimate black formula.

As this is a hand-application solution, the thick texture is also much easier to apply in the exact spots of the ATV plastic where it is most needed.

This versatile plastic restorer can be used on exterior plastic, vinyl, and rubber.

The other surfaces where Meguiar’s formula works perfectly are non-painted bumpers, handles, mirrors, housings, cowlings, and moldings as well.

This is a complete repair, shine, and protection package for all your ATV plastic body parts and would make the grey or surfaces hold their shiny features for a large period after the Meguiar’s formula is used.

The formula, once applied, protects the surfaces from the effects of ultraviolet rays.

If you mostly like to ride in open dunes or sandstone cliffs, you won’t have to worry about the effects of the harsh sunshine anymore.

The meguiar’s polish is made with such technology that it dries instantly after the ATV rider applies it.

Unlike many other plastic polishes in the market, this formula is non-greasy and doesn’t make a mess of your hands and other applicators you use.

The formula is also proof from water and doesn’t wear off in the rain or when you wash the ATV after a bumpy trail ride.

This meguiar’s formula is made using such advanced polymer technology that only a very small portion of it is required on the foam applicator, which you will be applying at the spots with scratches and the portions with faded color due to slight corrosion.

But make sure the surface of the plastic part is clean from normal dust, sand deposition or otherwise the formula of meguiar’s won’t be able to get evenly distributed and there would remain ill clots of dust which would act as a block for the meguiar’s ultimate black formula to work with its full effect.

You should also ensure the plastic surfaces are properly dry before using the meguiar’s plastic polish.

If the formula gets mixed with other kinds of cleaning agents or surface decompositions right at the time of application, you won’t get the desired shine and protection that this meguiar’s plastic polish is famous for.

The meguiar’s product dries up very fast, and just after ten minutes, you can touch the surfaces and find the polish dried up completely.

The meguiar’s has respectable longevity, and the dark shine remains for several weeks, making your ATV look brand new.

This spectacular plastic polish increases the life span of your ATV’s plastic parts by protecting them from all the battering of the natural elements of the rough trails.

Pros

  • Easy to use for both professionals and home users.
  • Versatile and can be used on a variety of surfaces.
  • Can renew old faded surfaces and enhance the color of new surfaces.
  • Has a pleasant bubble gum scent.

Cons

  • The product may not be suitable for use on foot pedals, steering wheels, or infotainment centers.
  • The longevity of the product’s effect may vary based on usage and environmental conditions.

Chemical Guys Plastic Sshine VRP Protectant

If you are looking for a plastic polish that would make your ATV plastic parts glow like if sitting in a car showroom, you should definitely check out this VRP plastic shine from the Chemical Guys company.

The advanced solution from Chemical Guys has deep penetration properties, which not only repair the plastic from the inside but also return its shine like it was at first.

The cream, like the texture of the plastic shine VRP from the chemical guys, is very to apply and use.

Unlike the liquid-like plastic polishes, which drip along the surface and often spill from the applicator foam, make a messy affair, that doesn’t happen with this plastic shine VRP.

This wonderful plastic shine VRP can be used all over your ATV on vinyl, rubber, and all types of plastic.

This plastic polish can be applied to tires, door panels, dashboards, bumper trims, grates, and cowls. This plastic shine has blocking properties.

After you apply a coating of this thick textured solution all over your vehicle, it will act as a sunscreen for your vehicle and protect all the plastic parts from the harsh heat and effect of the sun rays.

The ultraviolet rays are one of the major reasons for the ATV plastic parts to fade very soon and even show deep scratches in a few cracks.

This formula is a completely non-greasy product that fully dries up after a few minutes of application.

The plastic shine VRP is a long-lasting solution that protects your ATV plastic parts for a long, even if you ride your ATV through difficult trails daily.

The other unique feature of this VRP formula is its dirt and water-resistant capability.

Even if you wash the ATV daily and apply lots of water, the coating of the plastic shine VRP won’t become thin or get scrapped. The dirt resistance feature is rare and cannot be found easily on any plastic polish.

This VRP solution offers resistance to dust settlements and reduces the need for daily washing. If different types of dust are less settled, it also helps the plastic parts remain clean and durable.

This plastic VRP shine can be used not only on the exterior but also on the vehicle’s interior surfaces. This plastic polish is ideal for ATVs and can be used often.

If you ride your ATV often through very rough and difficult terrains or are into racing, then the damages on plastic might regularly come. In that case, you would need a plastic polish that can be used frequently.

Pros

  • Enhances shine and protects the surface.
  • Restores a deep black look to surfaces.
  • Protects against solar rays.
  • Leaves a no-residue and dry-to-the-touch finish.
  • Penetrates deep into the pores of surfaces.

Cons

  • May require multiple applications for desired results.
  • Might not be as effective on surfaces other than rubber, vinyl, or textured plastic.
  • The finish might not be appealing to everyone.

Mothers plastic polish for ATV

Mothers plastic polish does an excellent work of not only removing scratches but also giving a pure cleaning to the ATV plastic parts and leaving a noticeable shine on the vehicle.

This plastic polish comes with several benefits and does a lot more than plastic repair for it.

Once you have used this Mothers plastic polish on your ATV, the polymer coating will protect your ATV plastic parts from the sun’s heat rays and eroding effects from water and smog.

This coating of Mothers plastic polish also offers protection from easy scratches in the future.

This Mothers plastic polish is also very effective in removing stains and the yellowish effects, which seem to turn up on ATV plastic parts when the ATV gets old.

You can use it for a small quantity daily or everything you get back from riding a very happening trail with many obstacles.

The Mothers plastic polish is easily available on Amazon, costing only about seven dollars for one bottle and only around forty-four dollars for a pack of six.

Using them often on your ATV plastic also extends the life span of the applied plastic parts and also keeps them as good as new.

Always use a fully cotton or microfiber cloth when cleaning your ATV plastic with a Mothers plastic polish.

Be gentle, and do not handle the ATV plastic while you are wiping it with the Mothers plastic polish. You can also do a follow-up polish with a soft detail brush, which makes the polishing complete.

The polymer layer protective coating from mothers plastic polish doesn’t let you worry anymore about common hairline scratches, oxidation effects, several nicks, and conventional smudges.

If you use a protectant spray, you have to use it directly on the microfibre applicator. This is recommended because this gives way to much more control of where the protectant or restorative is used. Saturation splotches are also reduced if you use this process.

But before you apply the mother’s plastic polish, make sure the plastic body of your ATV is dry and at a cold or normal temperature.

Do not forget to let it dry for around half an hour so that the solution can penetrate the upper surface.

Then, you need to slide off the excess material from the edges and check the plastic parts for even texture.

Pros

  • Highly effective in restoring the color of black and gray plastic trims.
  • Easy to apply with a bit of elbow grease and an applicator sponge.
  • The effect of the product lasts for a considerable amount of time.
  • Works well on both black and gray trims.

Cons

  • The product can make certain surfaces extremely slippery, especially in humid or moist conditions.
  • Some surfaces may require multiple coats for the best results.

Why Do You Need to take care of plastic parts in ATVs?

ATV owners often make the mistake of getting a new plastic body for their ATV instead of repairing it with the right product. Several plastic polishes in the US market can easily remove scratches from your ATV plastic.

One or two do not bother most ATV owners, but it becomes a serious issue when the ATV plastic begins to fade in color and look old.

Nobody likes their ATV to look old and weary, so removing the prominent scratches and bringing back the plastic shine becomes very important.

It is not possible to save your ATV from scratches and drive extra cautiously because that would ruin the off-road fun and thrill, which is so unique. If you already own an ATV, you would know how versatile and sturdy these vehicles are and offer a riding experience like no other vehicle.

New ATV owners often don’t have the notion, and some ATV plastic polishes in the market are highly effective and fix every ATV plastic issue.

There are even products in the market that not only can remove scratches but also repair a cracked plastic body in your ATV. Here, all the best ATV plastic polishes are listed and easily available in all regions of the United States.

Conclusion

Atvs are meant to be taken care of often as they are dedicated off-road vehicles that go through extreme road conditions most of the time. The plastic parts of the ATV go through a lot and get scratched very often.

After long-term use, the ATV plastic color begins to fade in most of the ATVs, and if not taken care of, it leads to cracks.

When the ATV plastic parts get cracked, there remains no option but to replace them, which involves a good cost.

But if you use one of the best ATV plastic polishes in the US market, you can repair your plastic parts in time. Modern technology has led to amazing plastic polishes, which can make the plastic parts of the ATV just like new.